|
![Safety Relief Valves, Relief Valves](img00/srr_t1.jpg) |
|RPN6B Safety Relief Valve|RPF12 Safety Relief Valve|RPF13 Safety Relief Valve|
|RPC14 Relief Valve|R101-1BHA Relief Valve| |
■RPN6B Safety Relief Valve (463KB) |
![sr_a1](img02/sr_a1.jpg) |
For pressure vessel and piping protection
Size : 25〜200A
Fluid : Steam, gases, liquids
Set pressure : 0.05〜2.0MPa
Max. temperature : 205, 220, 300℃
Material : | BodyーFC, SCPH, SCS
|
Valve disc/seatーSUS
|
Connection : Flanged
• | Full bore, large capacity
|
• | High erosion-resistance due to STELLITE-faced valve disc and valve seat
|
• | Easy adjustment by single ring
|
• | Simple construction for easy maintenance
|
| ![spacer.gif](img00/spacer.gif) |
![space](img00/spacer.gif) |
![space](img00/spacer.gif) | ![space](img00/spacer.gif) | ![space](img00/spacer.gif) |
|
|
■RPF12 Safety Relief Valve (513KB) |
![sr_a2](img02/sr_a2.jpg) |
For pressure vessel and piping protection
Size : 15〜80A
Fluid : Steam, gases, liquids
Set pressure : 0.02〜2.0 MPa
Max. temperature : 205,220℃
Material : | BodyーFC, SCPH, SCS
|
Valve disc/seatーSUS
|
Connection : Flanged
• | Lift type
|
• | Easy adjustment by single ring
|
| ![spacer.gif](img00/spacer.gif) |
![spacer.gif](img00/spacer.gif) |
![spacer.gif](img00/spacer.gif) | ![spacer.gif](img00/spacer.gif) | ![spacer.gif](img00/spacer.gif) |
|
|
■RPF13 Safety Relief Valve (361KB) |
![sr_a3](img02/sr_a3.jpg) |
For pressure vessel and piping protection
Size : 15〜40A
Fluid : Steam, gases, liquids
Set pressure : 0.02〜1.6MPa
Max. temperature : 205, 220℃
Material : | BodyーFC
|
Valve disc/seatーSUS
|
Connection : Screwed
• | Lift type
|
• | Easy adjustment by single ring
|
| ![spacer.gif](img00/spacer.gif) |
![spacer.gif](img00/spacer.gif) |
![spacer.gif](img00/spacer.gif) | ![spacer.gif](img00/spacer.gif) | ![spacer.gif](img00/spacer.gif) |
|
|
To the top of this page |
■RPC14 Relief Valve (654KB) |
![sr_a4](img02/sr_a4.jpg) |
For thermal relief, water supply and pump by-pass
Size : 15〜80A
Fluid : Liquids
Set pressure : 0.04〜2.0MPa
Max. temperature : 205℃
Material : | BodyーFC, SCPH, SCS
|
Valve disc/seatーSUS
|
Connection : Screwed, Flanged
• | No chattering by dash-pot
|
• | Best for pump by-passing and for continuous blowing
|
| ![space](img00/spacer.gif) |
![.](img00/spacer.gif) |
![space](img00/spacer.gif) | ![space](img00/spacer.gif) | ![.](img00/spacer.gif) |
|
|
■R101-1BHA Relief Valve (188KB) |
![sr_a5](img02/sr_a5.jpg) |
For hot/cold water tank and pump by-pass
Size : 15〜40A
Fluid : Hot and cold water
Set pressure : 0.05〜1.6MPa
Max. temperature : 100℃
Material : | BodyーCAC
|
Valve discーSynthetic rubber
|
Connection : Screwed, Flanged
• | No malfunction caused by disc sticking because of no sliding parts on wet surface.
|
• | Can be installed in any position.
|
• | No leakage due to special synthetic rubber disc
|
• | Can be used in both continuous and intermittent operations.
|
| ![space](img00/spacer.gif) |
![.](img00/spacer.gif) |
![space](img00/spacer.gif) | ![space](img00/spacer.gif) | ![.](img00/spacer.gif) |
|
|
To the top of this page |
|