|
|
|JOB30T, 31T Bellows Expansion Joint|JOB40, 41 Bellows Expansion Joint
|
|J104-2 Sleeve Expansion Joint|J102 Boll Joint| |
■JOB30T, 31T Bellows Expansion Joint (266KB) |
|
For small linear expansion
Size : 20〜500A
Fluid : Steam, liquids, gases
Max. pressure : 1.0MPa
Max. temperature : 220℃
Max. traverse : | 35mm (JOB30T)
|
70mm (JOB31T)
|
Material : | FlangeーSS
|
Lapped flangeーSUS
|
Bellows/sleeveーSUS
|
Connection : Flanged
• | Stainless steel used for wet surfaces assures long service life.
|
• | Best for taking up linear expansion in general piping line.
|
| |
|
| | |
|
|
■JOB40, 41 Bellows Expansion Joint (794KB) |
|
For small linear expansion
Size : 20〜300A
Fluid : Steam, liquids, gases
Max. pressure : 2.0MPa
Max. temperature : 220℃
Max. traverse : | 35mm(JOB40)
|
70mm(JOB41)
|
Material : | FlangeーSS
|
Lapped flangeーSUS
|
Bellows/sleeveーSUS
|
Connection : Flanged
• | Stainless steel used for wet surfaces assures long service life.
|
• | Best for taking up linear expansion in general piping line.
|
| |
|
| | |
|
|
■J104-2 Sleeve Expansion Joint (114KB) |
|
For large linear expansion joint
Size : 25〜300A
Fluid : Steam, liquid, gases
Max. pressure : 1.0, 2.0MPa
Max. temperature : 300℃
Max. traverse : 200mm
Material : | BodyーSTPG, STKM
|
SleeveーSTPG with hard chrome plated
|
Connection : Flanged
• | Very large traverse
|
• | Maintenance free
|
• | Long service life
|
• | Sturdy and compact design
|
• | Small axis thrust on anchor bases
|
| |
|
| | |
|
|
■J102 Ball Joint (143KB) |
|
For handling and preventing dangerous pipe movement
Size : 65〜300A
Fluid : Steam, liquids, air
Max. pressure : 2.0MPa
Max. temperature : 220℃
Max. flex angle : 16〜30゜
Material : | BodyーSCPH
|
BallーSCPH
|
Connection : Butt-welded
• | Compact and sturdy construction
|
• | Small installation area for its large movement
|
• | Absorbs all movement simultaneously
|
• | Wide application and long service life
|
• | Small thrust on anchor bases
|
| |
|
| | |
|
|
To the top of this page |
|